Lodge Cast Iron Cookware New Cast Iron Cookware?

New cast iron cookware? - lodge cast iron cookware

I recently bought a Lodge cast iron grill plate and then follow the instructions exactly the first season, I thought. ) First wash wash with a stiff brush, hot water and soap, use a fine brush to cover the whole with the canola oil in a preheated oven set at 350 degrees for 1 hours, turn off the oven and cool Let stand until I first used to make burgers, smoked a lot and seemed to remain on the network. I immediately washed in warm water and a stiff brush, no soap, but it remains a sustance Important Important I can not even get a new green bushes. "Everything that I think that oil is also used. Can someone help me, I wanted so long, and it was expensive. Thanks!

kittyinct.

4 comments:

angel855... said...

What to do, rub the pan with steel wool, then try again. This time does not dry in the pan, but instead the burners on the stove and let the dry heat and season with DONT oil, rub a piece of wax paper around the inside of the oven or grill and it is a coating of plaque, nothing would be reluctant to ... really works ...

progolfe... said...

You must use a cleaner comet and scrub the kitchen to remove the mess and start again with new spices. This time, coat pan with oil and wipe off all access to a paper towel before it in the oven. You need only a thin layer of oil from them this season.

courviel said...

I know the trick. In Cook, no less than a melting pot. This is how they season. Fire does not make outsiders actually be great, but needs a few coals in Nice - that I could try in a chimney, but you can smoke, I do not know. Make sure your boat is clean. good scrub pads brightness with more than one. If there is still a sticky residue that's fine. Sand the inside and outside the pan with oil to taste them all. Then you can put the pot in the embers of the fire and burn. Carefully try from time to time with the gloves, new coat. 2 or 3 times is probably enough. Thus, the pan can burn well - but be careful if you could get heat, the cracks. When he bought the boat was probably a dark gray color black, it must determine if you are ready. Wash them well, then (do this) whenever you wash to dry the excess water,) then in oven (with the drive and let it dry, and a few drops of cooking oil and rub in well with a paper towel. Let stand in oven for 1-2 minutes. And sometimes rubbed with oil and put in oven at 150 to 200 viaNight.

hwfiedle... said...

I think you're doing the right thing ... it's just that the process of maturation can be performed in a procedure. Next is to use and to make things better. You can scrape the sticky deposit with a steel spatula.

Post a Comment